FoxSec Net+

FoxSec NET+ это надежная система охраны и контроля доступа с высоким уровнем безопасности.

Систему FoxSec NET+ характерезует высокая фунуциональность и надежность. Система спроектированна для долгосрочной эксплуатации.

FoxSec NET+ позволяет построение системы с очень большим количеством за счёт нового программного обеспечения. Система FoxSec NET+ полностью взаимодействует с системой FoxSec Lite+

Система позволяет управлять автоматикой здания через BACnet IP протокол.

FoxSec Net+ имеет интеграцию с видеонаблюдением, системой распознавания номеров и тд.

FoxSec Net+ components

Программного обеспечения

FoxSec Net+/W time attendance module

FoxSec Net+/W time attendance module
Time attendance software is intended for forming the work schedules and accounting the work time.
The work schedule consists of a cycle of shifts rotating in a specific order. The work schedules once determined will be generated automatically by the module in the future. Intervals and durations of work, lunch, overtime and rest hours are determined in turn by each shift (e.g. morning, evening, night etc.). The number of shifts and work schedules is not limited.
Work time is registered either by the movement through the doors or by the data entered by a special registrar. In addition to arriving to and leaving from work the registrar enables also to record special movements (e.g. lunch break, working out of office, business travel, sick leave etc.). The module enables to determine and register up to 99 movements.
Upon accounting the work time the module compares registered movements with the times given in the work schedule and calculates the employee’s work time (morning, evening, night, weekend and national holiday), overtime (on workday, weekend, national holiday), time being present outside of work time, tardies, absences, sick days, business travels.
In addition, the module enables to determine and record up to 9999 work operations (e.g. turning on a lathe, sawing, work order no. 164 etc.).
Data on each employee is brought out in the work time report for a chosen time period in table form by date and/or totaled. The date of the report can be exported to Excel spreadsheet.
FoxSec Net+/A access software
FoxSec Net+/A access software
The main software is located in the server, which enables to use the system in different work places. The hardware of the system is connected to the server through data transfer cable or computer network. The work place of the system does not need a separate computer; an existing one can be used that gives a client a chance to handle simultaneously everyday activities.
The system software is user-friendly and has a simple structure that guarantees fast learning and easy applicability. The system includes the HELP file.
The system also works without a computer by prior recording of modes and times of the access to the memory of the controller (up to 7600 users for controllers FS8001, FS8002 and 1850 users for controllers FS7001, FS7002).
Memories of the controllers FS8001, FS8002 hold up to 2000 last events and 7600 users (in case the controller is in on-line mode and all the data is saved on the hard-disc of the computer, it is possible to increase the number of users up to 32700)
The software enables to
change the data of the card holders
create access modes for selected time period;
make up to 31 different access modes for one door
create 9999 card user groups
block and deactivate cards
define cards (divide, identify) in pre-selected weekdays and time periods
identify personnel by photo module
add work time accounting module FoxSec Worktime NET+
have a back-up copy of all of the data for n times according to the client’s needs
receive operational information on the attendance of the card holders
User authorization:
User no. 1 (security manager) has a right to do the following from his own computer:
Monitor the movements of personnel in real time by identifying cardholders by photo module on the screen.
Enter and change work times and access modes.
Open and close the doors, if necessary.
Block and activate allowed floors of the lift.
User no. 2 (security officer) has a right to do the following from his own computer:
Monitor the movements of personnel in real time by identifying cardholders by photo module on the screen.
Open and close the doors, if necessary.
Block and activate allowed floors of the lift.
Block and activate visitor cards.
User no. 3 (secretary) has a right to do the following from his own computer:
Operative information and overview of the movements and attendance of the cardholders.
User no. 4 (human resource manager) has a right to do the following from his own computer:
Fill in the data of the cardholders, use photo module.
Block and activate employee cards.
Prepare work time reports by using the work time accounting module.
User no. 5 (manager) has a right to do the following from his own computer:
Can use one or all the abovementioned options in his own computer
FoxSec Net+/M monitoring software

FoxSec Net+/M monitoring software
FoxSec Monitoring software is created for client in order to have a better and more comprehensive picture of the object being monitored. The software has a simple structure and the help file makes the program easy to learn and user-friendly. The user language of the software is translatable and it can be selected between the existing language modules: English, Russian, Estonian.
The user can activate security on the security areas as well as on single security zones, monitor safety zones and search for events from the archive.
The software has a simple filtering of the events, which makes it possible to display on the screen and export file in html format.
In case of an alarm the type and location of the alarm are displayed on the computer screen (broken window, open door, etc.) and also the plan of the building and the precise location of the alarm. Messages of the alarm are sent out to the monitor with an audio signal. All alarm messages are saved on the hard disc of the computer for time period of x according to the wishes of the customer.

Центральная панель

Main panel

Main panel
16 zone inputs (expandable up to 240)
— up to 240 security areas
— 8 programmable relay outputs (24V/ 5A /NO/NC) (expandable to up to 240)
— 1 separate optically isolated data line for connection of up to 48 LED/LCD keyboards
— 1 separate optical isolated data line for connection of up to 14 16in/8out expansion modules
— 2 separate optically isolated RS485 or RS232 data lines for direct connection with a computer, phone, GSM (RS232) or door controllers (up to 31 FS7001, FS7002,
FS8001, FS8002) data communication (RS485)
— SMS-s of the events according to the pre-given filter
— data communication 10 MB Ethernet
— BacNet/IP protocol (optional, product name FS9000BN) NEW!
— simultaneously up to 4 FoxSec Net+ security monitoring programs and 1 FoxSec Access Net+ or FoxSec 1850 access monitoring programs
— e-mails of the event according to the pre-given filter
— FRAM (Ferroelectric Nonvolatile) technology based memory, data maintaining for 10 years in case of power disconnection,
— 2880 users
— access only 4- or 6-digit PIN number or PIN number and card
— start and end date of the access
— up to 19 areas can be given to a user and security on these is activated and deactivated by default
— 64 time and keyboard restriction groups
— 2500 event memory
— 250 separate last alarm memory
— real time clock
up to 48 one-time or periodic holidays
up to 80 one-time or periodically timed programs
— metal case H450 x L450 x 140
— power supply unit 12VDC, 3A
— battery recharging

Дверные контроллеры

FS8302PX24
FS8302PX24
2 doors, up to 4 readers, 2 doors output (5A)
2 programmable additional relay output (0,5A)
up to 7600 card users, 2000 last event memory
Power supply to the lock 24VDC
Compatible card readers:
26-bit Wiegand format reader
FS8311PX24
FS8311PX24
up to 2 readers
2 relay outputs (2 x 5A) one in and one out
2 additional programmable relay outputs (2 x 0,5A)
up to 7600 card users, 2000 last events in the memory of the controller
Power supply to the door 24VDC
Compatible card readers:
26-bit Wiegand format reader (PX)
FS8301PX24
FS8301PX24
1 door, up to 2 readers, 1 door output (5A)
1 programmable additional relay output (0,5A)
up to 7600 card users, 2000 last event memory
Power Supply to the lock 24VDC
Compatible card readers:
26-bit Wiegand format reader
FS8302PX12
FS8302PX12
2 doors, up to 4 readers, 2 doors output (5A)
2 programmable additional relay output (0,5A)
up to 7600 card users. 2000 last event memory
Compatible card readers:
26-bit Wiegand format reader
FS8311PX12
FS8311PX12
up to 2 readers
2 relay outputs (2 x 5A) one in and one out
2 additional programmable relay outputs (2 x 0,5A)
up to 7600 card users, 2000 last events in the memory of the controller
Power supply to the door 12VDC
Compatible card readers:
26-bit Wiegand format reader (PX)
FS8301PX12
FS8301PX12
1 door, up to 2 readers, 1 door output (5A)
1 programmable additional relay output (0,5A)
up to 7600 card users. 2000 last event memory
Compatible card readers:
26-bit Wiegand format reader
Контроллеры серии FS8300
Контроллеры серии FS8300
Door controller FS8000 series features
Card data and rights memory
Last event memory
Sensor determining the status of the door and opening switch
Tamper alarm
Alarm of opening the door by a key.
Alarm of a door being open too long
Low voltage alarm
1000 user groups
Each group has own access program for each door
Possibility to make up to 31 programs for each door
14 different holiday time periods
8 periodic programs per controller
63 time zones per controller
Up to 20 programs for 2 (not door) additional relays.
Up to 100 different controller configurations
Anti passback
Determined reader functions: Card (normal), Card + pin number
Two areas for Master card (1 to ID and ID to 7600), which enables to change the readers’ function
Dual card access
Empty room programmable relay
Power supply 230VAC 50Hz
Optional on-board 24VDC
1 x 12V7Ah battery backup for 12 and 24VDC
Battery trouble alarm
Full battery test and monitoring
Battery recharging
Metal case H300 x L220 x 75mm
RS485 (RS232 optional)
FS7302PX
FS7302PX
2 doors, up to 4 readers, 2 doors output (5A)
2 programmable additional relay output (0,5A)
up to 1850 card users. 500 last event memory
Compatible card readers:
26-bit Wiegand format reader
FS7311PX
FS7311PX
One door (2 readers)
Up to 1850 card users and 500 last events in the memory of the controller
Optical isolation
Metal case 300x220x75
Power supply unit 12VDC, 1,4A
Full Battery test
Compatible card readers:
26-bit Wiegand format readers
FS7301PX
FS7301PX
1 door, up to 2 readers, 1 door output (5A)
1 programmable additional relay output (0,5A)
up to 1850 card users. 500 last event memory
Compatible card readers:
26-bit Wiegand format reader

Контроллеры лифта

FS6380IO/16PX (MK)
FS6380IO/16PX (MK)
up to 16 floors
1 lift, 1 reader, outputs 16 X 0,5A
up to 7600 card users. 2000 last event memory
Compatible card readers:
26-bit Wiegand format reader
FS6380IO/8PX (MK)
FS6380IO/8PX (MK)
up to 8 floors
1 lift, 1 reader, outputs 8 X 0,5A
up to 7600 card users. 2000 last event memory
Compatible card readers:
26-bit Wiegand format reader
Возможности контроллера лифта
Возможности контроллера лифта
Compatible communication modules
ADP2 RS485/232
ADP3A RS485/Ethernet (for connecting with Internet)
FS9000 control panel door data line RS485
FS9131 door data line expansion module for the control panel FS9000
Lift controller features
Card data and rights memory
Last event memory
tamper alarm
Low voltage alarm
1000 user groups
Each group has own access program
Possibility to make up to 31 programs
14 different holiday time periods
Determined reader functions: Card (normal), Card + pin number
Two areas for Master card (1 to ID and ID to 1850 or 7600), which enables to change the readers’ function
Access by two cards
Empty room programmable relay
Power suplly 230VAC 50Hz
Battery recharging
Metal case H300 x L220 x 75mm
RS485 (RS232 optional)
FS6300IO/8PX
FS6300IO/8PX
up to 8 floors
1 lift, one reader, outputs 8 x 0,5A
up to 1850 card users. 500 last event memory
Compatible card readers:
26-bit Wiegand format reader
FS6300IO/16PX
FS6300IO/16PX
up to 16 floors
1 lift, 1 reader, outputs 16 X 0,5A
up to 1850 card users. 500 last event memory
Compatible card readers:
26-bit Wiegand format reader

Модули расширения

Expansion module FS9116/8

Expansion module FS9116/8
— 16 zone inputs
— 8 programmable relay outputs (24V/ 5A /NO/NC)
— metalbox H300 x L220 x 75mm
— power supply unit 12VDC, 1,4A
— battery recharging
Expansion module FS9116/2

Expansion module FS9116/2
— 16 zone inputs
— 2 programmable relay outputs (24V/ 5A /NO/NC)
— metalbox H300 x L220 x 75mm
— power supply unit 12VDC, 1,4A
— battery recharging
Expansion module FS9116/0

Expansion module FS9116/0
— 16 zone inputs
— possibility to choos zone resitor value
— fireproof plastic case H155 x L230 x 45mm
— power supply 12VDC
Expansion module FS9108/8

Expansion module FS9108/8
— 8 zone inputs
— 8 programmable relay outputs (24V/ 1A /NO/NC)
— possibility to choose zone resitor value
— fireproof plastic case H155 x L230 x 45mm
— power supply 12VDC
Expansion module FS9108/2

Expansion module FS9108/2
— 8 zone inputs
— 2 programmable relay outputs (24V/ 1A /NO/NC)
— possibility to choos zone resitor value
— fireproof plastic case H155 x L230 x 45mm
— power supply 12VDC

Релейные модули

Output expander module FS9100/8.8

Output expander module FS9100/8.8
— 8 programmable relay outputs (240V/ 0,5A /NO/NC)
— power supply 12V VDC
— PCB (without metalcase and power supply unit)
Output module FS9100/8

Output module FS9100/8
— 8 programmable relay outputs (240V/ 5A /NO/NC)
— metalcase H300 x L220 x 75mm
— power supply unit 12VDC, 1,4A
— battery recharging

Клавиатуры

LCD keypad FS9500LCD

LCD keypad FS9500LCD
2×20 LCD keyboard with characters and back lighting
— keyboard number lighting with changing radiance according
to the router lighting
— activating and deactivating security of areas (up to 19 areas
at the same time)
— changing PIN code
— displaying and accepting alarms
— temporary restraining of users, sensors or expansion
modules
— internal on external proximity cardreader (optional)
— power supply 12VDC 250mA
— working temperature 0 – +40 ºC (without evaporation), IP55
LCD keypad FS9501LCD

LCD keypad FS9501LCD
2×20 LCD keyboard with characters and back lighting
— fast and friendly interface, flat design
— silicone buttons with back lighting
— keyboard number lighting with changing radiance according
to the router lighting
— possibility to choose between different back lighting colors
— activating and deactivating security of areas (up to 19 areas
at the same time)
— changing the PIN code
— displaying and accepting alarms
— temporary restraining of users, sensors or expansion
modules
— up to 2km of CanBus datalines
— local keypad 100 event memory
— internal on external proximity card reader (optional)
— power supply 12VDC 100mA
— working temperature 0 – +40 ºC (without evaporation), IP55

Модули связи

Communication module ADP4

Communication module ADP4
ADP-3A is an Ethernet adapter that enables an economic and efficient connection of the equipment to the computer network by using RS485 data transfer line. 10 MB Ethernet data line (static IP address enables data change with the controllers through the Internet). Data is encrypted.
Power supply 12 VDC 150mA
Expansion module FS9131
Expansion module FS9131
For additional 31 door controllers into FoxSec Monitoring software
FS9140 Contact ID communicator (phone line)
Up to 240 Contact ID accounts
Up to 98 areas
Up to 999 users
Communication module ADP2

Communication module ADP2
ADP-2 communication module corresponds to industrial standard RS485 and computer serial port. ADP-2 enables to connect up to 31 controllers.
Power supply 12 VDC 100 mA

Дополнительные устройства

Credit controller
Credit controller
Used for discounting employees (lunches)
Automatic decree employee credit
Display for rest of the credit for each person
Scheduled monthly, weekly or daily adding predefined per employee credit
Tabel reader L1000
Tabel reader L1000
for managing cards
built-in distance card reader
Power supply 12VDC 500m
RF module FS9150

RF module FS9150
RF module is for activating and deactivating security areas from distance. Module has 1 relay output, which is possible to use for example opening the garage door.
— 1 programmable relay output
(24V/ 1A /NO/NC)
— metal case H300 x L220 x 75 mm
— power supply unit 12VDC, 1,4A
— battery recharging
Contact ID communicator FS9140

Contact ID communicator FS9140
— up to 240 contact ID accounts
— up to 98 areas
— up to 999 users